Welcome to WebmasterWorld Guest from 54.144.79.200

Forum Moderators: incrediBILL & lawman

Message Too Old, No Replies

Gizmo Quiz #58

     

defanjos

6:04 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



Here it is [siternetusa.com]

What is it exactly?
What was it first developed for?

Good luck.

oilman

6:10 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



is it used in law enforcement?

JonB

6:11 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



gun that produces high frequency sounds to break walls(or other things?)

Duckula

6:13 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



Is it used to open very expensive champagne bottles?

defanjos

6:14 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



All the above are very creative, but not even close.

JonB

6:17 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



ok,does this "gun" receive or "shoot"?

defanjos

6:22 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>ok,does this "gun" receive or "shoot"?

Very good question.
This device receives

Duckula

6:25 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



Is it an air gun to change tires at pit stops?

PanUK

6:28 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



It's a 'Sonic gun' to tackle plane hijackers

defanjos

6:30 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>It's a 'Sonic gun' to tackle plane hijackers

Hmmmmmmmmmm..............no
doesn't change tires either

JonB

6:30 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



looks like radar gun used for speed detection.

JonB

6:33 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



speedo meter(radar gun) used for baseball pitchers:)

[edited by: JonB at 6:36 pm (utc) on Nov. 23, 2002]

pmac

6:36 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



Is it used in Television or Movie production?

defanjos

6:37 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



Not a kind of radar gun or speed measuring device.

defanjos

6:39 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>Is it used in Television or Movie production?
No

oilman

6:40 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



some sort of chemical sensor for measuring airborn concentration?

PanUK

6:41 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



Is it a sonic gun for fixing horse races.?

tbear

6:44 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



Is that finger on a trigger of the pistol grip┐

At last I'm here before the quiz is over.....:)

defanjos

6:46 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>some sort of chemical sensor for measuring airborn concentration?

No, but the "sensor" part is going in the right direction.

defanjos

6:48 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>Is that finger on a trigger of the pistol grip┐
I don't know

Glad you could make it, the more the merrier :)

JonB

6:53 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



does it collect some kind of "gas" (like air,sound,laser etc) or something biological/chemical?

defanjos

6:57 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>does it collect some kind of "gas" (like air,sound,laser etc) or something biological/chemical?

Wow, you covered some ground with that question.
It is related to one of the above, and I won't say which one yet.

Duckula

7:03 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



I can't come with the name for this. <added: geiger counter> Does this thing detects high energy particles like beta particles or radioactive isotope density?

defanjos

7:08 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



>I can't come with the name for this. <added: geiger counter> Does this thing detects high energy particles like beta particles or radioactive isotope density?

No

Thanasus

7:26 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



Hmm... I'm going with a stream of consciousness thing here, so bear with me.

I see 3 primary components:
1. Primary Unit
2. Collector
3. Trigger

I would assume that the primary unit has a receiver circuit on it, and the collector is tehre to minimize background interference. Due to the apparent symmetrical nature of the collector, I'd guess orientation of the device does not matter. I notice on the primary unit is what appears to be a know, possibly a variable adjustor which will change the sensitivity or recalibrate the device?

IMHO, the collector is not wide enough for it to collect sound. Additionally, it looks as though the collector is made of some sort of plastic so that rules out the ability to collect any radioactive materials except for alpha rays.

The back of the primary unit, where the 'knob' is doesn't seem to have much room for a readout display. So I would guess it's a simple feedback device. Maybe a green/red light or a beeping noise for the presence of something.

Perhaps an old fashioned stud finder? No... because that cone doesn't seem like it would work well with an emitter. BUt perhaps the device is meant to be placed up against something.

Well, you got me... hopefully some of my ranting is on target and will help someone figure it out.

Duckula

7:32 pm on Nov 23, 2002 (gmt 0)

10+ Year Member



Very funny. I was looking at it by the side all this time. The right side "cone" is the handler, and the "handler" is a PVC tube with an smaller tube inside. Then, the small tube connects to some device and measures concentrations on that device's output.

Or it's that I'm in need of a break and going crazy :)

defanjos

7:37 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



I would assume that the primary unit has a receiver circuit on it, and the collector is tehre to minimize background interference. Due to the apparent symmetrical nature of the collector, I'd guess orientation of the device does not matter. I notice on the primary unit is what appears to be a know, possibly a variable adjustor which will change the sensitivity or recalibrate the device?

It does have a receiver
I think the orientation matters

IMHO, the collector is not wide enough for it to collect sound. Additionally, it looks as though the collector is made of some sort of plastic so that rules out the ability to collect any radioactive materials except for alpha rays

Wrong

The back of the primary unit, where the 'knob' is doesn't seem to have much room for a readout display. So I would guess it's a simple feedback device. Maybe a green/red light or a beeping noise for the presence of something.

Not sure if it has a readout

Perhaps an old fashioned stud finder? No... because that cone doesn't seem like it would work well with an emitter. BUt perhaps the device is meant to be placed up against something.?

No

defanjos

7:39 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



Very funny. I was looking at it by the side all this time. The right side "cone" is the handler, and the "handler" is a PVC tube with an smaller tube inside. Then, the small tube connects to some device and measures concentrations on that device's output

Wrong

defanjos

7:44 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



First clue

It was first developed by a government agency in 1991, now it is used as a commercial product - used for safety and to save money.

defanjos

7:46 pm on Nov 23, 2002 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member



Second clue

Think sound

This 84 message thread spans 3 pages: 84
 

Featured Threads

Hot Threads This Week

Hot Threads This Month