Forum Moderators: bakedjake

Message Too Old, No Replies

3com adsl usb modem install

everything correct but can't find the modem?

         

jamie

9:39 pm on Jan 20, 2003 (gmt 0)

WebmasterWorld Senior Member 10+ Year Member Top Contributors Of The Month



hi all,

am trying to install a 3com adsl usb modem to RH8.

i have (i think) correctly installed the drivers. i have copied the 3cinit.bin and 3cmain.bin to the /usr/sbin and extracted the ez-usb.bin firmware to the /usr/sbin as well.

so far so good. i then only needed to initiate the modem:

3cload.sh

whereupon i received the following:

>>>Inits 3Com ADSL Modem USB <<<

>>> Loading USB controller (if it is not loaded)...
/lib/modules/2.4.18-14/kernel/drivers/usb/uhci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/kernel/drivers/usb/uhci.o: insmod /lib/modules/2.4.18-14/kernel/drivers/usb/uhci.o failed
/lib/modules/2.4.18-14/kernel/drivers/usb/uhci.o: insmod uhci failed
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-ohci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-ohci.o: insmod /lib/modules/2.4.18-14/kernel/drivers/usb/usb-ohci.o failed
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-ohci.o: insmod usb-ohci failed

>>> Loading EZ-USB firmware...
3Com ADSL Modem USB microcode upload program
Josep Comas <jcomas@gna.es>. 24/3/2002

Error: I didn't find your ADSL modem

can anyone shed some light on what might have gone wrong?

many thanks

jpjones

1:23 pm on Jan 21, 2003 (gmt 0)

10+ Year Member



Hi,

/lib/modules/2.4.18-14/kernel/drivers/usb/uhci.o: init_module: No such device

/lib/modules/2.4.18-14/kernel/drivers/usb/usb-ohci.o: init_module: No such device

The problem seems to be in the above - the system cannot find your USB controller. Is the modem the only hardware you have plugged into the USB port?

Try the following as root:
modprobe usb-uhci

Does it give you any errors like the above?

If not, you need to edit the startup script so it calls this command rather than modprobe uhci.

HTH,
JP