mack - 11:11 pm on Jun 16, 2010 (gmt 0)

>>Smart data

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120 series
Device Model: SAMSUNG SP2014N
Serial Number: S088J1RYA07505
Firmware Version: VC100-33
User Capacity: 200,049,647,616 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Thu Jun 17 00:07:45 2010 BST

==> WARNING: May need -F samsung3 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82)Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0)The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4809) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003)Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01)Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5888
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4232
5 Reallocated_Sector_Ct 0x0033 098 098 010 Pre-fail Always - 20
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 16307
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2498
190 Airflow_Temperature_Cel 0x0022 145 103 000 Old_age Always - 31
194 Temperature_Celsius 0x0022 145 103 000 Old_age Always - 31
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 691997
196 Reallocated_Event_Count 0x0032 098 098 000 Old_age Always - 20
197 Current_Pending_Sector 0x0012 253 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 6 occurred at disk power-on lifetime: 16295 hours (678 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 47 02 41 e3 Error: AMNF 8 sectors at LBA = 0x03410247 = 54592071

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 47 02 41 e3 00 00:01:24.000 READ DMA
c8 00 08 57 76 c1 e0 00 00:01:24.000 READ DMA
c8 00 08 5f 76 c1 e0 00 00:01:24.000 READ DMA
c8 00 08 67 76 c1 e0 00 00:01:24.000 READ DMA
c8 00 08 3f 67 c1 e0 00 00:01:24.000 READ DMA

Error 5 occurred at disk power-on lifetime: 16295 hours (678 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 4f 02 40 e3 Error: AMNF 8 sectors at LBA = 0x0340024f = 54526543

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 4f 02 40 e3 00 00:19:39.625 READ DMA
c8 00 08 17 73 01 e3 00 00:19:39.625 READ DMA
c8 00 08 0f 73 01 e3 00 00:19:39.625 READ DMA
c8 00 08 07 73 01 e3 00 00:19:39.625 READ DMA
c8 00 08 df 72 01 e3 00 00:19:39.625 READ DMA

Error 4 occurred at disk power-on lifetime: 16295 hours (678 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 8f 3d 41 e3 Error: AMNF 8 sectors at LBA = 0x03413d8f = 54607247

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f 3d 41 e3 00 00:19:26.000 READ DMA
c8 00 08 cf 73 01 e3 00 00:19:26.000 READ DMA
c8 00 08 c7 73 01 e3 00 00:19:26.000 READ DMA
c8 00 08 77 70 01 e3 00 00:19:26.000 READ DMA
c8 00 08 2f 70 01 e3 00 00:19:26.000 READ DMA

Error 3 occurred at disk power-on lifetime: 16295 hours (678 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 7f 0b 40 e3 Error: AMNF 8 sectors at LBA = 0x03400b7f = 54528895

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 7f 0b 40 e3 00 00:19:05.500 READ DMA
c8 00 08 9f db c7 e3 00 00:19:05.500 READ DMA
c8 00 08 a7 6e 01 e3 00 00:19:05.500 READ DMA
c8 00 e0 67 2a 00 e3 00 00:19:05.500 READ DMA
c8 00 08 97 db c7 e3 00 00:19:05.500 READ DMA

Error 2 occurred at disk power-on lifetime: 16294 hours (678 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 3f 21 40 e3 Error: AMNF 8 sectors at LBA = 0x0340213f = 54534463

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 3f 21 40 e3 00 00:01:50.563 READ DMA
c8 00 08 3f 69 c1 e0 00 00:01:50.563 READ DMA
c8 00 08 e7 09 c1 e2 00 00:01:50.563 READ DMA
c8 00 08 4f 51 c0 e2 00 00:01:50.563 READ DMA
c8 00 08 3f 51 c0 e2 00 00:01:50.563 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16307 -

SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

-------------------------------------

I have never been great at understanding smart diagnostic messages.

Mack.