Nick_W
msg:308717 | 7:03 pm on Oct 4, 2003 (gmt 0) |
VPL calibration unit? Nick
|
werty
msg:308718 | 7:04 pm on Oct 4, 2003 (gmt 0) |
Is it used for making knurls on a lathe?
|
Yidaki
msg:308719 | 7:04 pm on Oct 4, 2003 (gmt 0) |
>VPL calibration Lol! I''m not the one who has to answer questions! :) ... VPL calibration? i guess no ...
|
Yidaki
msg:308720 | 7:05 pm on Oct 4, 2003 (gmt 0) |
>knurls on a lathe Guys, please don't talk turkish with me! ;)
|
jimbeetle
msg:308721 | 7:09 pm on Oct 4, 2003 (gmt 0) |
Does the knurled knob adjust the opening between the two black pincer looking thingies (love those technical terms).
|
werty
msg:308722 | 7:09 pm on Oct 4, 2003 (gmt 0) |
Is it used in manufacturing? Would it be found in a machine shop?
|
jimbeetle
msg:308723 | 7:10 pm on Oct 4, 2003 (gmt 0) |
Does it fit in a pocket?
|
defanjos
msg:308724 | 7:12 pm on Oct 4, 2003 (gmt 0) |
Is it used in woodworking?
|
Yidaki
msg:308725 | 7:13 pm on Oct 4, 2003 (gmt 0) |
>Is it used in manufacturing? Would it be found in a machine shop? Nope. Not really. >Does it fit in a pocket? Hm. Yes. >Is it used in woodworking? nope
|
mack
msg:308726 | 7:16 pm on Oct 4, 2003 (gmt 0) |
Would this be part of a larger device? Mack.
|
jimbeetle
msg:308727 | 7:17 pm on Oct 4, 2003 (gmt 0) |
Okay, I'll repeat it: Does the knurled knob adjust the opening between the two black pincer looking thingies (love those technical terms).
|
Yidaki
msg:308728 | 7:17 pm on Oct 4, 2003 (gmt 0) |
no, mack. One piece - one tool.
|
defanjos
msg:308729 | 7:18 pm on Oct 4, 2003 (gmt 0) |
Is it used to transfer a measurement from one place to another?
|
Yidaki
msg:308730 | 7:18 pm on Oct 4, 2003 (gmt 0) |
Jim, please specifiy / translate. LOL. :) >Is it used to transfer a measurement from one place to another? nope
|
mack
msg:308731 | 7:19 pm on Oct 4, 2003 (gmt 0) |
Does something run through the two groves? does the wheel section have a ratchet (allows it to rotate in one direction) Mack.
|
werty
msg:308732 | 7:19 pm on Oct 4, 2003 (gmt 0) |
Is it used to make sure the width of something is consistant, perhaps a bike wheel or tire?
|
jimbeetle
msg:308733 | 7:20 pm on Oct 4, 2003 (gmt 0) |
Too technical, huh? If you turn the knob do the black things move back and forth?
|
waynet
msg:308734 | 7:21 pm on Oct 4, 2003 (gmt 0) |
Is it used to make a grove pattern into something?
|
Yidaki
msg:308735 | 7:21 pm on Oct 4, 2003 (gmt 0) |
>Too technical, huh? am a kraut. :) >If you turn the knob do the black things move back and forth?
Yep!
|
Yidaki
msg:308736 | 7:23 pm on Oct 4, 2003 (gmt 0) |
>Is it used to make sure the width of something is consistant... No. >Is it used to make a grove pattern into something? erm, nope.
|
bakedjake
msg:308737 | 7:23 pm on Oct 4, 2003 (gmt 0) |
Is it used on humans?
|
jimbeetle
msg:308738 | 7:23 pm on Oct 4, 2003 (gmt 0) |
Is it used to measure?
|
Yidaki
msg:308739 | 7:24 pm on Oct 4, 2003 (gmt 0) |
not used to humans not used to measure.
|
2oddSox
msg:308740 | 7:24 pm on Oct 4, 2003 (gmt 0) |
Is it used to grip or hold something?
|
waynet
msg:308741 | 7:24 pm on Oct 4, 2003 (gmt 0) |
Is it used to hold small items?
|
Yidaki
msg:308742 | 7:25 pm on Oct 4, 2003 (gmt 0) |
>Is it used to grip or hold something? somehow ...
|
werty
msg:308743 | 7:26 pm on Oct 4, 2003 (gmt 0) |
Would you call it a clamp or vise? IS it used to grab onto something to aid in the removal?. Perhaps a tool used to remove the backs off of a watch?
|
bakedjake
msg:308744 | 7:26 pm on Oct 4, 2003 (gmt 0) |
Is it a brake for a scooter?
|
RobinC
msg:308745 | 7:27 pm on Oct 4, 2003 (gmt 0) |
It looks like a strange sort of IC chip extractor tool... Probably not though ;-)
|
| This 44 message thread spans 2 pages: 44 ( [1] 2 ) > > |
|
|
