| 2:47 am on Jul 11, 2003 (gmt 0)|
Does it work internally looking directly at the 10.0.1.2:80?
| 4:47 am on Jul 11, 2003 (gmt 0)|
10.0.1.2:80 gives me a default page BUT
10.0.1.2/~pamelaparks:80 gives me an error...
got to think about these paths!
[127.0.0.1...] works great also...
This seems odd...
| 7:33 am on Jul 11, 2003 (gmt 0)|
Try this one
| 1:33 pm on Jul 11, 2003 (gmt 0)|
works just fine
Now I need someone to try
[edited by: DaveAtIFG at 3:53 pm (utc) on July 11, 2003]
[edit reason] Edited specific IP [/edit]
| 1:39 pm on Jul 11, 2003 (gmt 0)|
Have you tried setting Apache to listen on port 7000 in httpd.conf, then mapping to port 7000 rather than to port 80 on 10.0.1.2?
PS. Best to remove that IP address quick if you don't want unwelcome visitors.
| 1:42 pm on Jul 11, 2003 (gmt 0)|
Many cable companies do not give PUBLIC IP addresses. Have you confirmed your IP address is public?
| 2:29 pm on Jul 11, 2003 (gmt 0)|
The port is mapped to an alternate... see first post in this thread....
has anyone tried these links to see if they get a page?
Ok and about those unwelcome visitors.... so they see a default page... what would be the problem?
[edited by: DaveAtIFG at 3:54 pm (utc) on July 11, 2003]
[edit reason] Edited specific IPs [/edit]
| 2:37 pm on Jul 11, 2003 (gmt 0)|
The page is not coming up for me
| 3:20 pm on Jul 11, 2003 (gmt 0)|
Ok... so I can see pages locally using
all these are on the LAN
My router... airport is set to recieve requests from the WAN on port 7000 and map them to 10.0.1.2:80 and I set my web sharing to punch a hole in the firewall at port 7000.
Other users have pinged and tracert my WAN IP sucessfully but cannot get the web page when they attempt to browse to
A cat of /private/var/log/httpd/error_log is showing no errors so I guess this isolates the problem upstream of apache... to the firewall or the port mapping or maybe even my isp. I don't know enough Unix to know which logs I might look at to try to track this down... any ideas?
| 1:28 am on Jul 12, 2003 (gmt 0)|
Your ISP is filtering port 80. You cannot access this port externally, because some ISP do not allow to run web server.
i know for a fact, that VIDEOTRON Cable, is doing so.
i had that same problem, use 8080.
You'll have to access the server via: [WAN_IP:8080...]