homepage Welcome to WebmasterWorld Guest from 23.20.61.85
register, free tools, login, search, pro membership, help, library, announcements, recent posts, open posts,
Become a Pro Member

Home / Forums Index / Code, Content, and Presentation / Apache Web Server
Forum Library, Charter, Moderators: Ocean10000 & incrediBILL & phranque

Apache Web Server Forum

    
Apache 503 / LB failed.help !
kingakoopa



 
Msg#: 4561371 posted 3:01 pm on Apr 4, 2013 (gmt 0)

Hello Apache Kings and Queens,
Im stuck in an issue where i freshly built apache just wont simply forward my requests to my 2 JBoss servers clustered servers.
Im using Mod_JK 1.2.27
Apache 2.2.21
Linux RHEL 5.7
Boss 7

I keep getting 503 errors-Service Temporarily Unavailable on the browser
Even though I can hit the servlets and JSPs on there just fine if I hit the JBoss server individually.
I get these errors in the mod_jk.log file
[Thu Apr 04 01:54:34 2013] [6068:3860842240] [debug] ajp_send_request::jk_ajp_common.c (1520): (worker1) request body to send 0 - request body to resend 0
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] jk_shutdown_socket::jk_connect.c (680): About to shutdown socket 14
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] jk_shutdown_socket::jk_connect.c (731): Shutdown socket 14 and read 0 lingering bytes
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1104): (worker1) can't receive the response message from tomcat, tomcat (10.1.1.222:8180) has forced a connection close for socket 14
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [error] ajp_get_reply::jk_ajp_common.c (1920): (worker1) Tomcat is down or refused connection. No response has been sent to the client (yet)
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [info] ajp_service::jk_ajp_common.c (2407): (worker1) sending request to tomcat failed (recoverable), (attempt=2)
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [error] ajp_service::jk_ajp_common.c (2426): (worker1) connecting to tomcat failed.
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_reset_endpoint::jk_ajp_common.c (743): (worker1) resetting endpoint with sd = 4294967295 (socket shutdown)
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_done::jk_ajp_common.c (2850): recycling connection pool slot=0 for worker worker1
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [info] service::jk_lb_worker.c (1347): service failed, worker worker1 is in error state
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] service::jk_lb_worker.c (1358): recoverable error... will try to recover on other worker
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] get_most_suitable_worker::jk_lb_worker.c (969): found best worker worker2 (worker2) using method 'Request'
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] service::jk_lb_worker.c (1133): service worker=worker2 route=worker1
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_get_endpoint::jk_ajp_common.c (2922): acquired connection pool slot=0 after 0 retries
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_service::jk_ajp_common.c (2246): processing worker2 with 2 retries
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_send_request::jk_ajp_common.c (1461): (worker2) all endpoints are disconnected.
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] jk_open_socket::jk_connect.c (451): socket TCP_NODELAY set to On
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] jk_open_socket::jk_connect.c (575): trying to connect socket 14 to 10.1.1.111:8180
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] jk_open_socket::jk_connect.c (601): socket 14 connected to 10.1.1.111:8180
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connect_to_endpoint::jk_ajp_common.c (931): Connected socket 14 to (10.1.1.111:8180)
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1033): sending to ajp13 pos=4 len=509 max=8192
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1033): 0000 12 34 01 F9 02 02 00 08 48 54 54 50 2F 31 2E 31 - .4......HTTP/1.1
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1033): 0010 00 00 16 2F 68 65 6C 6C 6F 77 6F 72 6C 64 2F 48 - .../helloworld/H
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1033): 0020 65 6C 6C 6F 57 6F 72 6C 64 00 00 0D 31 37 32 2E - elloWorld...173.
[Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1033): 0030 33 31 2E 34 35 2E 32 34 39 00 FF FF 00 21 74 30 - 11.42.222....!Thu Apr 04 01:55:34 2013] [6068:3860842240] [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1033): 0040 31 64 72 77 31 34 30 30 2E 64 73 6D 2E 74 69 63 - server1
.
.
.
.
.
[Thu Apr 04 01:56:34 2013] [6068:3860842240] [debug] ajp_send_request::jk_ajp_common.c (1520): (worker2) request body to send 0 - request body to resend 0
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [debug] jk_shutdown_socket::jk_connect.c (680): About to shutdown socket 14
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [debug] jk_shutdown_socket::jk_connect.c (731): Shutdown socket 14 and read 0 lingering bytes
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1104): (worker2) can't receive the response message from tomcat, tomcat (10.1.1.111:8180) has forced a connection close for socket 14
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [error] ajp_get_reply::jk_ajp_common.c (1920): (worker2) Tomcat is down or refused connection. No response has been sent to the client (yet)
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] ajp_service::jk_ajp_common.c (2407): (worker2) sending request to tomcat failed (recoverable), (attempt=2)
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [error] ajp_service::jk_ajp_common.c (2426): (worker2) connecting to tomcat failed.
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [debug] ajp_reset_endpoint::jk_ajp_common.c (743): (worker2) resetting endpoint with sd = 4294967295 (socket shutdown)
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [debug] ajp_done::jk_ajp_common.c (2850): recycling connection pool slot=0 for worker worker2
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] service::jk_lb_worker.c (1347): service failed, worker worker2 is in error state
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [debug] service::jk_lb_worker.c (1358): recoverable error... will try to recover on other worker
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [debug] service::jk_lb_worker.c (1101): retry 1, sleeping for 100 ms before retrying
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] force_recovery::jk_lb_worker.c (577): worker worker1 is marked for forced recovery
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] force_recovery::jk_lb_worker.c (577): worker worker2 is marked for forced recovery
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] service::jk_lb_worker.c (1399): Forcing recovery once for 2 workers
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] service::jk_lb_worker.c (1416): All tomcat instances failed, no more workers left (attempt=0, retry=1)
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] service::jk_lb_worker.c (1416): All tomcat instances failed, no more workers left (attempt=1, retry=1)
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] service::jk_lb_worker.c (1427): All tomcat instances are busy or in error state
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [error] service::jk_lb_worker.c (1432): All tomcat instances failed, no more workers left
[Thu Apr 04 01:57:34 2013] [6068:3860842240] [info] jk_handler::mod_jk.c (2476): Service error=0 for worker=loadbalancer
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1035): Attempting to map URI '/favicon.ico' from 4 maps
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld/HelloWorld/*=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld/HelloWorld=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld/*=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] jk_translate::mod_jk.c (3361): no match for /favicon.ico found
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1035): Attempting to map URI '/favicon.ico' from 4 maps
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld/HelloWorld/*=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld/HelloWorld=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld/*=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] find_match::jk_uri_worker_map.c (849): Attempting to map context URI '/helloworld=loadbalancer' source 'JkMount'
[Thu Apr 04 01:57:35 2013] [6070:3976877824] [debug] jk_map_to_storage::mod_jk.c (3428): no match for /favicon.ico found




Here are my workers.properties
# Define a worker named 'worker1' (more workers can be added as comma separated values)
#worker.list=loadbalancer,status
worker.list=loadbalancer
# Node #1 properties
worker.worker1.type=ajp13
worker.worker1.host=server1.com
worker.worker1.port=8180
worker.worker1.lbfactor=1

# Node #2 properties(will be configured later when apache and node 1 start working)
worker.worker2.type=ajp13
worker.worker2.host=server2.com
worker.worker2.port=8180
worker.worker2.lbfactor=1

# Load-balancing behaviour
worker.loadbalancer.type=lb
worker.loadbalancer.balance_workers=worker1,worker2

# Status worker for managing load balancer
#worker.status.type=status
#worker.loadbalancer.sticky_session=true

mod_jk.conf
# Set path to workers.properties.
JkWorkersFile conf/jk/workers.properties

# Set path to jk shared memory. Generally, you'll want this to point to your local state or logs directory.
JkShmFile /apps/logs/mod_jk.shm

# Set path to jk logs. This path should point to the same logs directory as the HTTPD access_log.
JkLogFile /apps/logs/mod_jk.log

# Set the jk log level. Valid values for this setting are 'debug', 'error', or 'info'.
JkLogLevel debug

# Set timestamp log format. Use provided variables to customize.
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "

JkMount /helloworld/* loadbalancer
JkMount /helloworld loadbalancer
JkMount /helloworld/HelloWorld/* loadbalancer
JkMount /helloworld/HelloWorld loadbalancer



httpd.conf
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/apps/apache" will be interpreted by the
# server as "/apps/apache/logs/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/apps/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
Listen 8080

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule jk_module modules/mod_jk.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User coresvcd
Group coregrpd

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/apps/apache/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/apps/apache/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# [httpd.apache.org...]
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/apps/logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel debug

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "/apps/logs/access_log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/apps/apache/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>

#
# "/apps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/apps/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or 0 for unlimited
# Default setting is to accept 200 Ranges
#MaxRanges 0

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
Include conf/jk/mod_jk.conf

<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>




Any help is very much appreciate.

King Koopa



 

kingakoopa



 
Msg#: 4561371 posted 8:26 pm on Apr 4, 2013 (gmt 0)

figured it out....the app server's ajp port was not configured....

Global Options:
 top home search open messages active posts  
 

Home / Forums Index / Code, Content, and Presentation / Apache Web Server
rss feed

All trademarks and copyrights held by respective owners. Member comments are owned by the poster.
Home ¦ Free Tools ¦ Terms of Service ¦ Privacy Policy ¦ Report Problem ¦ About ¦ Library ¦ Newsletter
WebmasterWorld is a Developer Shed Community owned by Jim Boykin.
© Webmaster World 1996-2014 all rights reserved